MOQ:1set
Produced in China for mining contractors, beneficiation plants and equipment distributors, this mining cart is summarised below by construction, capacity and drive, followed by the commercial terms a buyer normally asks about first.
Specifications
| Item | Parameter |
| Model | HT-4T |
| Rated Load Capacity | 4000kg |
| Power Type | Battery power |
| Maximum Travel Speed | 25km/h |
| Overall Dimensions (L×W×H) | 4200×1400×2100mm |
| Cargo Box Dimensions (L×W×H) | 2600×1400×450mm |
| Tires | Front: 700-16; Rear: 750-16 |
| Battery | 72V 200Ah |
| Motor | 7500W |
| Steering System | Hydraulic power steering |
| Control System | Matching controller for 72V 7500W |
| frame System | Reinforced welded double-beam frame |
| Braking System | Hydraulic brake + hand brake |
| Rear Axle | Model 130 reinforced electric axle |
| Lifting System | Single hydraulic cylinder for self-dumping |
| Auxiliary Facilities | LED headlight, horn, voice reversing alarm, warning light, detachable canopy |
| Cargo Box Plate Thickness | Bottom: 4mm, Side: 3mm |
| Driving Mode | Center steering wheel |
| Drive Type | Rear-wheel drive |
| Transmission Type | Gear transmission |
| Rear Wheel Track | 1400mm |
| Ground Clearance | 250mm |
| Discharging Mode | Rear discharge with single jack cylinder |
| Cargo Box Volume | 2 cubic meters |
| Rear Leaf Spring Assembly | Main frame: 9 pieces × 10mm; Auxiliary frame: 6 pieces × 10mm |
| Self Weight | 2000kg |
| Shock Absorption | Front main leaf spring: 8 pieces × 10mm; Rear main leaf spring: 7 pieces, auxiliary leaf spring: 7 pieces × 10mm |
Material & Construction
The cargo box plate thickness is stated as Bottom: 4mm, Side: 3mm. That choice of wear material sets the service life of the working surfaces and, together with the casting weight, most of the unit price. It is the figure buyers confirm against a wear-life figure or a reference installation before ordering.
Capacity & Drive
Rated performance is given as rated load capacity of 4000kg and power type rated at Battery power. Those figures are quoted against a stated feed material and moisture content, so a site with harder rock or a wetter feed should expect a lower effective throughput than the nominal number.
Dimensions & Packing
Dimensions and shipping data are stated as model of HT-4T. Overall dimensions and unit weight decide the transport class, the lifting points and whether the machine ships as a whole unit or in modules for site assembly — worth fixing before freight is quoted.
Customisation & OEM Service
The unit can be built to your duty: alternative wear material, a different motor voltage or drive arrangement, and a modified discharge setting can all be quoted against your specification. Send the feed material, target output and site power supply and the factory will confirm what is feasible on this frame size. For this item, minimum order quantity is 1 Piece and the reference price starts at US$6,000.00 per set.
Ordering & Samples
For equipment of this size the usual path is a drawing review, then a factory acceptance check before shipment. Lead time and freight are quoted against the confirmed configuration and the destination port.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
