This screen mesh is offered for bulk supply and OEM production. Working principle, rated capacity and configuration are set out in the table below, with the ordering details further down the page.
Specifications
| Stainless Steel Grade | SS304, 316, 316L, 430, 310s, 2205, etc |
| Aluminum Alloy | 6061, 5056, 5052 |
| Copper | Pure Copper, Brass, Bronze |
| Special Materials | Nickel, Titanium, Silver, Tungsten, Molybdenum, Monel, Inconel, Nichrome, Hastelloy |
| Weave Types | Plain Weave, Twill Weave, Plain Dutch Weave, Twill Dutch Weave, Reverse Dutch Weave, etc |
| Wire Diameter Range | 0.016-0.5mm |
| Width Range | Maximum 6m, usually the width is 1m |
| Length Range | Maximum 50m, usually the length is 30m/roll |
| Mesh Type | Rolls and sheets are available |
| Production Standards | ASTM E2016 - 20 |
Material & Construction
The stainless steel grade is stated as SS304, 316, 316L, 430, 310s, 2205, etc. Material grade drives how long the liners and plates survive in abrasive duty, and it is the first thing to pin down when comparing quotes — two units at the same price can differ by a full liner set.
Dimensions & Packing
Dimensions and shipping data are stated as wire diameter range of 0.016-0.5mm. For heavy units the packing format is part of the quote: skid, crate or container loading changes both the freight cost and the unloading equipment required on site.
Customisation & OEM Service
Options include wear-liner grade, drive type and the guards and chute work around the discharge. Share the installation conditions and a feasibility answer is returned with the price. For this item, minimum order quantity is 30 Square Meters and the reference price starts at US$12.10-12.70 per set.
Ordering & Samples
For equipment of this size the usual path is a drawing review, then a factory acceptance check before shipment. Lead time and freight are quoted against the confirmed configuration and the destination port.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
