This sand washing machine is offered for bulk supply and OEM production. Working principle, rated capacity and configuration are set out in the table below, with the ordering details further down the page.
Specifications
| Model | Specifications (liner/porcelain) |
| Alumina content | ≥95% |
| Density | ≥3.6 g/cm3 |
| Rockwell hardness | ≥85 HRA |
| Compressive strength | ≥850 MPa |
| Fracture toughness KIC | ≥4.8MPa m1/2 |
| Bending strength | ≥290MPa |
| Wear resistance | ≤0.0002g (p=76N n=800 rpm t=30 minutes) |
| Ceramic sheet thickness | 1.5-25mm |
Material & Construction
The rockwell hardness is stated as ≥85 HRA. Material grade drives how long the liners and plates survive in abrasive duty, and it is the first thing to pin down when comparing quotes — two units at the same price can differ by a full liner set.
Dimensions & Packing
Dimensions and shipping data are stated as model of Specifications (liner/porcelain). Shipping weight and footprint drive container or flat-rack loading and the crane capacity needed at the destination, so both are normally confirmed together with the packing list.
Customisation & OEM Service
Options include wear-liner grade, drive type and the guards and chute work around the discharge. Share the installation conditions and a feasibility answer is returned with the price. For this item, minimum order quantity is 1 Set and the reference price starts at US$550.00-850.00 per set.
Ordering & Samples
A pre-shipment inspection is normally arranged so the build, the wear parts and the drive can be checked before the unit is crated. Quotation follows the final specification and shipping terms.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
