Produced in China for mining contractors, beneficiation plants and equipment distributors, this spiral separator is summarised below by construction, capacity and drive, followed by the commercial terms a buyer normally asks about first.
Specifications
| Channel material | Nylon/Polyurethane |
| Diameter (mm) | 1250 |
| Pitch Space (mm) | 720 |
| Start number | Single/twin/triple/quad |
| Turns/start | From 3 to 13 laps |
| Particle size(mm) | 0.03-0.30 |
| Pulp density (WW) | < 55% |
| Single head hourly processing capacity | 1.2-7.5 |
| Proportion of heavy ore (ww%) | 0.001-98 |
| Apply stage | Rougher Cleaner, fine selection, sweeping selection, PK shaking table |
Material & Construction
The channel material is stated as Nylon/Polyurethane. The grade matters more than the headline tonnage on abrasive feed: it decides relining intervals and therefore the real cost per tonne over the life of the machine.
Capacity & Drive
Rated performance is given as single head hourly processing capacity of 1.2-7.5. Nameplate capacity assumes a defined feed size and bulk density. Ask for the curve rather than the single number if the plant has to hold a product-size specification.
Dimensions & Packing
Dimensions and shipping data are stated as diameter (mm) of 1250. For heavy units the packing format is part of the quote: skid, crate or container loading changes both the freight cost and the unloading equipment required on site.
Customisation & OEM Service
Options include wear-liner grade, drive type and the guards and chute work around the discharge. Share the installation conditions and a feasibility answer is returned with the price. For this item, minimum order quantity is 16 Sets and the reference price starts at US$999.00-10,999.00 per set.
Ordering & Samples
For equipment of this size the usual path is a drawing review, then a factory acceptance check before shipment. Lead time and freight are quoted against the confirmed configuration and the destination port.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
