MOQ:1set
This scooptram is offered for bulk supply and OEM production. Working principle, rated capacity and configuration are set out in the table below, with the ordering details further down the page.
Specifications
| Rated power (kW) | 47 |
| Working mass (kg) | 5670 |
| Bucket capacity (m³) | 0.6 |
| Dumping height (mm) | 1200 |
| Dumping distance (mm) | 805 |
| Maximum lift force (kN) | 52 |
| Maximum traction force (kN) | 50 |
| Sum of three items (s) | 8 |
| Wheelbase/Track (mm) | 2400/890 |
| Minimum Ground Clearance (mm) | 180 |
| Maximum Dump Angle (°) | 37 |
| Maximum Steering Angle (°) | 40 |
| Turning Radius (Outside Bucket) (mm) | 4420 |
| Rated Energy (kWh) | 70.6 |
| Rated Voltage (V) | 153.6 |
| Temperature Control Method | Heating film heats up during charging, intelligent temperature control for heating, and natural cooling |
| Test Charging Station Power (kw) | 35KW(Automatic matching175V,200A) |
| Charging Time (h) | 20%-100% 2 h (normal temperature) |
| Applicable Ambient Temperature | -30~60℃ |
| Waterproof and Dustproof Rating | IP55 |
| Number of gears | 1 front and 1 rear |
| Forward speed (km/h) | 9.5 |
| Reverse speed (km/h) | 7.5 |
| Parking brake | Spring brake |
Capacity & Drive
Rated performance is given as bucket capacity (m³) of 0.6 and rated power (kw) rated at 47. Nameplate capacity assumes a defined feed size and bulk density. Ask for the curve rather than the single number if the plant has to hold a product-size specification.
Dimensions & Packing
Dimensions and shipping data are stated as working mass (kg) of 5670. For heavy units the packing format is part of the quote: skid, crate or container loading changes both the freight cost and the unloading equipment required on site.
Customisation & OEM Service
Options include wear-liner grade, drive type and the guards and chute work around the discharge. Share the installation conditions and a feasibility answer is returned with the price. For this item, minimum order quantity is 1 Piece and the reference price starts at US$50,000.00-60,000.00 per set.
Ordering & Samples
For equipment of this size the usual path is a drawing review, then a factory acceptance check before shipment. Lead time and freight are quoted against the confirmed configuration and the destination port.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
