MOQ:1set
This machine is offered for bulk supply and OEM production. Working principle, rated capacity and configuration are set out in the table below, with the ordering details further down the page.
Specifications
| Weight | ≈ 24kg |
| Length | 604mm |
| Cylinder dia | 70mm |
| Piston stroke | 70mm |
| Work pressure | 0.4~0.63MPa |
| Impact frequency | ≥ 27HZ |
| Air consumption | ≤ 55L/s |
| Air pipe inner dia | 19mm |
| Drilling diameter | 34~42mm |
| Shank dimensions (Hex×Length) at 0.4Mpa | H22×108±1mm |
| Lubricator | FY200B |
| Capacity | 200ml |
Product Highlights
The item is described with these characteristics:
- Always wear safety helmet, goggles and ear protectors during drilling. Any local regulations that exist must also be observed
- Check that the hoses used are of the right quality, and that all hose connections are in good condition and properly tightened
- Before starting work on any of the systems, make sure that the air and water systems are without pressure
- Open the main valve for compressed air
- Open the cock for the flushing water
- Adjust the feed control lever to given a suitable feed force for collaring the hole
Capacity & Drive
Rated performance is given as capacity of 200ml and impact frequency rated at ≥ 27HZ. Throughput is normally quoted for a reference feed gradation. Hardness, moisture and the target product size all move the real figure, which is why the duty cycle is worth stating up front.
Dimensions & Packing
Dimensions and shipping data are stated as weight of ≈ 24kg. Shipping weight and footprint drive container or flat-rack loading and the crane capacity needed at the destination, so both are normally confirmed together with the packing list.
Customisation & OEM Service
Options include wear-liner grade, drive type and the guards and chute work around the discharge. Share the installation conditions and a feasibility answer is returned with the price. For this item, minimum order quantity is 1 Piece.
Ordering & Samples
A pre-shipment inspection is normally arranged so the build, the wear parts and the drive can be checked before the unit is crated. Quotation follows the final specification and shipping terms.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
