MOQ:1set
Produced in China for mining contractors, beneficiation plants and equipment distributors, this machine is summarised below by construction, capacity and drive, followed by the commercial terms a buyer normally asks about first.
Specifications
| Weight | 24kg |
| Dimension ( L×W×H ) | 668×232×202mm |
| Cylinder diameter | 70mm |
| Piston stroke | 70mm |
| Impact energy | ≥ 65J ( 0.63Mpa ) |
| Impact frequency | ≥ 32Hz ( 0.63Mpa ) |
| Air consumption | ≤ 80L/s ( 0.63Mpa ) |
| Torque | ≥ 18N·m ( 0.63Mpa ) |
| Air hose inner diameter | 19mm |
| Water hose inner diameter | 13mm |
| Water pressure | 0.2-0.3Mpa |
| Drilling diameter | 34-42mm |
| Max drilling depth | 5m |
| Working temperature | -30~50ºC |
| Shank size | H22×108mm |
| Lubricator | FY200A |
| Capacity | 0.2L |
| Air Leg | FT160A |
| Length | 1668mm |
| Feeding length | 1338mm |
| Piston bore | 65mm |
Product Highlights
The item is described with these characteristics:
- Always wear safety helmet, goggles and ear protectors during drilling. Any local regulations that exist must also be observed
- Check that the hoses used are of the right quality, and that all hose connections are in good condition and properly tightened
- Before starting work on any of the systems, make sure that the air and water systems are without pressure
- Open the main valve for compressed air
- Open the cock for the flushing water
- Adjust the feed control lever to given a suitable feed force for collaring the hole
Capacity & Drive
Rated performance is given as capacity of 0.2L and impact frequency rated at ≥ 32Hz ( 0.63Mpa ). Those figures are quoted against a stated feed material and moisture content, so a site with harder rock or a wetter feed should expect a lower effective throughput than the nominal number.
Dimensions & Packing
Dimensions and shipping data are stated as weight of 24kg. Overall dimensions and unit weight decide the transport class, the lifting points and whether the machine ships as a whole unit or in modules for site assembly — worth fixing before freight is quoted.
Customisation & OEM Service
The unit can be built to your duty: alternative wear material, a different motor voltage or drive arrangement, and a modified discharge setting can all be quoted against your specification. Send the feed material, target output and site power supply and the factory will confirm what is feasible on this frame size. For this item, minimum order quantity is 1 Piece.
Ordering & Samples
Ordering starts with the duty specification and a layout drawing, followed by a proforma against the confirmed configuration. Delivery schedules are quoted per order rather than published on the page.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
