MOQ:1set
This drilling rig is built in China for quarries, mineral processing plants and aggregate producers, and is supplied for wholesale and OEM orders. The table below lists the build, the working parameters and the packing published for the unit.
Specifications
| 1 | Basic parameters |
| 2 | Equipment configuration |
| System pressure (bar) | 200 |
| Impact power (kW) | 20 |
| Impact energy (Hz) | 380 |
| Maximum rotation torque (N·m) | 820 |
| Rotation speed (r/min) | 220 |
| Water consumption (L/min) | 30-50 |
| Drilling diameter (mm) | φ45-φ115 |
| Coverage area () | 24 |
| Coverage width/height (mm) | 5025/5000 |
| Boom lifting angle | -43° ~ +52° |
| Boom swing angle | ±30° |
| Maximum propulsion force (kN) | 15 |
| Drill rod length (mm) | 3090 (standard)/3700 |
| Drilling depth per push (mm) | 2830 (standard)/3440 |
| Flip angle | ±180° |
| Pitch angle | -3°~ +90° |
| Power (kW) | 55.8 |
| Maximum torque | 310Nm/1600rpm |
| Emission and noise standards | National IV (EURO IV) |
| Transmission system | Four-wheel drive |
| Travel speed (km/h) | 0~15 |
| Ground clearance (mm) | 220 |
| Steering system | Articulated steering |
| Steering angle (°) | ±40 |
| Wheelbase (mm) | 2300 |
| Motor power (kW) | 55 |
| Hydraulic oil tank capacity (L) | 180 |
| Rated displacement (L/min) | 52 (12bar) |
| Water outlet pressure (bar) | 12 |
| Minimum water inlet pressure (bar) | 2 |
Capacity & Drive
Rated performance is given as hydraulic oil tank capacity (l) of 180 and impact power (kw) rated at 20. Nameplate capacity assumes a defined feed size and bulk density. Ask for the curve rather than the single number if the plant has to hold a product-size specification.
Dimensions & Packing
Dimensions and shipping data are stated as drilling diameter (mm) of φ45-φ115. For heavy units the packing format is part of the quote: skid, crate or container loading changes both the freight cost and the unloading equipment required on site.
Customisation & OEM Service
The unit can be built to your duty: alternative wear material, a different motor voltage or drive arrangement, and a modified discharge setting can all be quoted against your specification. Send the feed material, target output and site power supply and the factory will confirm what is feasible on this frame size. For this item, minimum order quantity is 1 Piece and the reference price starts at US$100,000.00-250,000.00 per set.
Ordering & Samples
For equipment of this size the usual path is a drawing review, then a factory acceptance check before shipment. Lead time and freight are quoted against the confirmed configuration and the destination port.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
