MOQ:1set
Produced in China for mining contractors, beneficiation plants and equipment distributors, this drilling rig is summarised below by construction, capacity and drive, followed by the commercial terms a buyer normally asks about first.
Specifications
| Drifter | RD18U EPIROC |
| Shank adapter | T38 |
| Height over drill center | 89mm |
| Length | 1008mm |
| Impact power | 18KW |
| Impact rate | 60HZ |
| Impact pressure | 180-200bar |
| Rotation system | Separate rotation |
| Rotation speed | 0-220r/min |
| Rotation torque, max | 1050Nm |
| Lub. air consumption | 7.5L/S(3bar) |
| Water consumption | 40-120L/min |
| Weight | 185kg |
| Drill steel | 1220 mm(1525/1830) |
| Hole depth | 30 m |
| Feed force | 13 kN |
| Total installed power | 65.5kw |
| Main motor | 55kw |
| Voltage | 380v( customized) |
| Frequency | 50HZ |
| Cable reel diameter | 1050mm |
| H(roof down) | 2300 mm |
| H(roof up) | 3000 mm |
| L | 7900 mm |
| Ground clearance | 300 mm |
Material & Construction
The drill steel is stated as 1220 mm(1525/1830). Material grade drives how long the liners and plates survive in abrasive duty, and it is the first thing to pin down when comparing quotes — two units at the same price can differ by a full liner set.
Capacity & Drive
Rated performance is given as impact power rated at 18KW. Those figures are quoted against a stated feed material and moisture content, so a site with harder rock or a wetter feed should expect a lower effective throughput than the nominal number.
Dimensions & Packing
Dimensions and shipping data are stated as height over drill center of 89mm. Overall dimensions and unit weight decide the transport class, the lifting points and whether the machine ships as a whole unit or in modules for site assembly — worth fixing before freight is quoted.
Customisation & OEM Service
Options include wear-liner grade, drive type and the guards and chute work around the discharge. Share the installation conditions and a feasibility answer is returned with the price. For this item, minimum order quantity is 1 Piece and the reference price starts at US$250,000.00-350,000.00 per set.
Ordering & Samples
Ordering starts with the duty specification and a layout drawing, followed by a proforma against the confirmed configuration. Delivery schedules are quoted per order rather than published on the page.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
