MOQ:30set
Produced in China for mining contractors, beneficiation plants and equipment distributors, this screen mesh is summarised below by construction, capacity and drive, followed by the commercial terms a buyer normally asks about first.
Specifications
| Main Material | brass mesh is 65%, the zinc content is 35% |
| Wire Diameter Range | 0.03-0.70mm. |
| Mesh Size Range | Plain Weave: 5- 200 mesh, Twill Weave: Up to 250 mesh, Dutch Weave: Can be customized as required. |
| Width Range | Usually, 0.914-3 m, can be cut according to customer requirements, the minimum is 3 mm. |
| Length Range | Usually 30 m, up to 150 m. |
| Mesh Type | Generally 30m/roll, various shapes can also be cut as required. |
| Minimum Order Quantity | 1*30m. |
| Delivery Time | Stock orders are shipped on the same day, and custom orders are negotiated for delivery time. |
| Sample Policy | 15cm × 15cm sample is free, but you should need to pay the freight. (The fee will be refunded in the official order). |
| Loading | By wooden boxes. |
Material & Construction
The main material is stated as brass mesh is 65%, the zinc content is 35%. The grade matters more than the headline tonnage on abrasive feed: it decides relining intervals and therefore the real cost per tonne over the life of the machine.
Dimensions & Packing
Dimensions and shipping data are stated as wire diameter range of 0.03-0.70mm.. For heavy units the packing format is part of the quote: skid, crate or container loading changes both the freight cost and the unloading equipment required on site.
Customisation & OEM Service
The unit can be built to your duty: alternative wear material, a different motor voltage or drive arrangement, and a modified discharge setting can all be quoted against your specification. Send the feed material, target output and site power supply and the factory will confirm what is feasible on this frame size. For this item, the reference price starts at US$19.50 per set.
Ordering & Samples
A pre-shipment inspection is normally arranged so the build, the wear parts and the drive can be checked before the unit is crated. Quotation follows the final specification and shipping terms.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
