This drilling rig is built in China for quarries, mineral processing plants and aggregate producers, and is supplied for wholesale and OEM orders. The table below lists the build, the working parameters and the packing published for the unit.
Specifications
| Drilling diameter | 90-2 10 mm |
| Drilling depth | 150-200m |
| Moving speed | 30km/h |
| Adapt to rock hardness | f=6-20 |
| Working air pressure | 0.7-2.5Mpa |
| Air consumption | 5-30m3/min |
| Sliding framework stroke | 1800mm |
| Minimum terrain clearance | 400mm |
| Ma x tum-around torque | 4500N.m |
| Lifting force | 9T |
| Lifting speed | 40m/min |
| Climb a n gle | 30° |
| Rotary speed | 50-110 r/min |
| Penetration efficiency | 10-35m/h |
| Drill pipe | 76mm |
| Drill pipe length | 1.5m |
| Max height | 3200mm |
| Adaptor DTH hammer | 4 " 5 " 6 " |
| Air compressor | Above 20m3/2.0Mpa |
| Outer size(length*width*height) | 3000x 1 4 50x 1950 ( mm) |
| Weight | 2.8T |
Material & Construction
The adapt to rock hardness is stated as f=6-20. Material grade drives how long the liners and plates survive in abrasive duty, and it is the first thing to pin down when comparing quotes — two units at the same price can differ by a full liner set.
Capacity & Drive
Rated performance is given as penetration efficiency of 10-35m/h and moving speed rated at 30km/h. Nameplate capacity assumes a defined feed size and bulk density. Ask for the curve rather than the single number if the plant has to hold a product-size specification.
Dimensions & Packing
Dimensions and shipping data are stated as drilling diameter of 90-2 10 mm. For heavy units the packing format is part of the quote: skid, crate or container loading changes both the freight cost and the unloading equipment required on site.
Customisation & OEM Service
Options include wear-liner grade, drive type and the guards and chute work around the discharge. Share the installation conditions and a feasibility answer is returned with the price. For this item, minimum order quantity is 1 Set and the reference price starts at US$9,999.00-19,999.00 per set.
Ordering & Samples
A pre-shipment inspection is normally arranged so the build, the wear parts and the drive can be checked before the unit is crated. Quotation follows the final specification and shipping terms.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
