This machine is offered for bulk supply and OEM production. Working principle, rated capacity and configuration are set out in the table below, with the ordering details further down the page.
Specifications
| Overall dimensions (mm) | 9050× 2280 ×2300 |
| Rated load capacity | 20000 kg |
| Maximum traction force | 220kN |
| Standard bucket capacity | 10.0m³ |
| 1st gear | 4.5km/h |
| 2nd gear | 8.9km/h |
| 3rd gear | 14.9km/h |
| 4th gear | 25.7km/h |
| Carriage unloading angle | 65° |
| Approach angle | 15° |
| Operating weight | 20500 kg |
| Front axle load | 14100 kg |
| Rear axle load | 6400 kg |
| Operating ambient temperature | -15°C~+45°C |
| Standard working altitude range | Adopting the CUMMINS QSL9 engine, there is no power loss at an altitude below 2000 meters and an ambient temperature of 25 ºC |
| Diesel engine | CUMMINS QSL9 |
| Rated power | 224 kW @ 2100rpm |
| Maximum torque | 1369Nm @ 1500 rpm |
| Number of cylinders | Inline 6-cylinder |
| Displacement | 8.9 L |
| Cooling system | water-cooled engine |
| fuel system | Integrated hand pump, remote fuel filter |
| Air intake system | Turbo Dry air filtration, pre filtration+two-stage filtration |
| control system | Fuel electronic control injection system |
| Starting system | 24V Starting motor |
| emission standard | EURO III |
| exhaust system | DOC+POC+Silencer |
| Average fuel consumption, at 50% load | 21.5L/h |
| Fuel tank capacity | 300L |
| Dana CL5000 | With torque converter locking |
| Dana 36000 | Electronic shift Forward 4th gear&Reverse 4th gear |
| Front axle SHAR Rigid axle | Kessler D81 Standard Differential |
| Rear axle SHAR Rigid axle | Kessler D81 Standard Differential |
| Model | 16.00-25 |
| Joint standards | JIC standard |
| Rubber hose standard | GB3683 |
| Working hydraulic oil tank capacity | 240L |
| Steering hydraulic cylinder | 2 pcs |
| Steering pump form | gear pump |
| Lifting cylinder | 2 pcs |
| Working main valve | open |
| Working pump form | gear pump |
| Automatic brake activation system | standard |
| Manual emergency brake release pump | standard |
| Warning and alarm system | Audible and visual alarm prompt |
| Dashboard | IFM 7-inch color display screen Fully functional rocker switch control |
| Central articulation | Slewing bearing |
| tank | Integrated with rack |
| alternator | 28 V, 100A |
| Battery | 2×12 V, 100 /165Ah |
| Starter | 24V, 7.8KW |
| lighting | LED lights 4pcs in front rack 2pcs in the rear rack |
| Horn/backup alarm | standard |
| Flashing warning light | standard |
| Turn signal | 2pcs in front rack 2pcs in the rear rack |
| Red and green indicator lights | 2pcs in front rack 2pcs in the rear rack |
| Reverse camera system | 1PC display in the cab 1PC camera in rear rack |
| Portable fire extinguisher | 8kg 1pc |
| Heat source isolation protective cover | standard |
| Cooling fan cover | standard |
| The main power switch can be locked | standard |
| Emergency brake button | 1 pc front frame/1 pc cab |
| Operation manual | Chinese or English |
| service manual | Chinese or English |
| Spare parts manual | Chinese or English |
| Maintenance manual | Chinese or English |
| Label sticker | Chinese or English |
Material & Construction
The rubber hose standard is stated as GB3683. Material grade drives how long the liners and plates survive in abrasive duty, and it is the first thing to pin down when comparing quotes — two units at the same price can differ by a full liner set.
Capacity & Drive
Rated performance is given as rated load capacity of 20000 kg and diesel engine rated at CUMMINS QSL9. Throughput is normally quoted for a reference feed gradation. Hardness, moisture and the target product size all move the real figure, which is why the duty cycle is worth stating up front.
Dimensions & Packing
Dimensions and shipping data are stated as overall dimensions (mm) of 9050× 2280 ×2300. Shipping weight and footprint drive container or flat-rack loading and the crane capacity needed at the destination, so both are normally confirmed together with the packing list.
Customisation & OEM Service
OEM production covers the nameplate, the paint scheme and the electrical configuration, plus frame modifications within the limits of the existing pattern. A drawing review normally comes back with the quotation. For this item, minimum order quantity is 1 Piece and the reference price starts at US$200,000.00-300,000.00 per set.
Ordering & Samples
Ordering starts with the duty specification and a layout drawing, followed by a proforma against the confirmed configuration. Delivery schedules are quoted per order rather than published on the page.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
