MOQ:1set
This drilling rig is offered for bulk supply and OEM production. Working principle, rated capacity and configuration are set out in the table below, with the ordering details further down the page.
Specifications
| Main parameter | Parameter values |
| Size | 17000*2800*2900/3750mm |
| Maximum excavation height | 9700mm |
| Drilling diameter | φ43mm-φ102mm |
| Drill pipe length | 5525mm |
| Drilling depth | 5300mm |
| Drilling speed | 0.8-2m/min |
| Motor power | 55*2KW |
| Fuel tank capacity | 600L |
| Overall weight | 33000kg |
| Rock drilling power head model | 1838ME |
| Rotation | Positive 135 ° Reverse 225 ° |
| Swing arm | 45 ° left and right |
| Travel compensation | 1800mm |
| Main arm stroke | 1600mm |
| Sliding rail swing angle | 2 ° elevation and 90 ° elevation |
| Diesel engine power | 129kw |
| Turn | ±40 |
| Tires | 14.00-24.00 |
| Climbing ability | ≤17° |
| Rear axle swing angle | ±10° |
| Approach angle/departure angle | 20°/17° |
| Inside turning radius | Inner side 3.3m/outer side 6.95m |
| Walking speed | 15km/h |
| Ground clearance | 350mm |
| Air compressor flow rate | 1m³/min |
| Pressure | 0.3-0.6MPa |
| Air compressor motor power | 4.5KW |
| Water pump flow rate | 10m³/h |
| Pump motor power | 7.5kw |
| Battery rate | 2x12v |
| Driving lighting | 24v |
| Work lighting | 220v |
| Impact frequency | 60Hz |
| Impact power | 18kW |
| Impact pressure | Max 230bar |
| Rotary motor model | OMS 160 |
| Impact flow rate | 71-92L/min |
| Empty buffer pressure | 3-3.5Mpa |
| Buffered traffic | 8-10L/min |
| Adapt to drill pipes | R38 , T38 |
| Rotary pressure | 210bar |
| Maximum torque | 1000Nm |
| Rotating speed | 0-215rpm |
| Lubricating oil and gas pressure | 2-3bar |
| Flushing water pressure | Max 2.5Mpa |
| Rock drilling buffer pressure | 5-12Mpa |
Capacity & Drive
Rated performance is given as fuel tank capacity of 600L and drilling speed rated at 0.8-2m/min. Throughput is normally quoted for a reference feed gradation. Hardness, moisture and the target product size all move the real figure, which is why the duty cycle is worth stating up front.
Dimensions & Packing
Dimensions and shipping data are stated as size of 17000*2800*2900/3750mm. Shipping weight and footprint drive container or flat-rack loading and the crane capacity needed at the destination, so both are normally confirmed together with the packing list.
Customisation & OEM Service
OEM production covers the nameplate, the paint scheme and the electrical configuration, plus frame modifications within the limits of the existing pattern. A drawing review normally comes back with the quotation. For this item, minimum order quantity is 1 Piece and the reference price starts at US$280,000.00-430,000.00 per set.
Ordering & Samples
Ordering starts with the duty specification and a layout drawing, followed by a proforma against the confirmed configuration. Delivery schedules are quoted per order rather than published on the page.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
