Produced in China for mining contractors, beneficiation plants and equipment distributors, this scooptram is summarised below by construction, capacity and drive, followed by the commercial terms a buyer normally asks about first.
Specifications
| Engine | Engine:VOLVO TAD1352 water-cooled low pollution Rated power/rated speed:256 kW/1900 r/min Maximum output torque:2175 N ² M @ 1200 r/min Starting method:Electric starting Exhaust gas purification method: Catalytic purification method Throttle control:Williams electronic throttle controller |
| Transmission system | Transmission model:DANA 6000 series Torque converter model: DANA CL8000 Drive axle model: DANA 53R300 Total speed ratio:30.4 Tires: Pneumatic tires |
| Steering system | Type: Central hinge, hydraulic steering Steering working pump: P2075/2025 Displacement: 75ml/r Maximum pressure of steering system: 20 MPa Steering multi way valve: K170LS Steering cylinder diameter/rod diameter ³ Number of cylinders: φ 150/ φ 90 mm ³ two |
| Working System | Working directional valve:M200LS-2-4588 Lift cylinder diameter/rod diameter ³ Number of cylinders: φ 160/ φ 100 mm ³ two Bucket cylinder diameter/rod diameter ³ Number of cylinders: φ 260/ φ 160 mm ³ two Maximum pressure of working system: 24MPa |
| Electrical System | System voltage: 24V DC Starting motor voltage/power:24V/6kW Lighting: 2 front headlights, 2 ³ 75W, 24V, 2 rear headlights, 2 ³ 75W, 24V 2 cab ceiling lights, 24 V |
| Fuel tank capacity | Hydraulic oil tank: 540 L Fuel tank: 450 L Transmission:32 L Drive axle main transmission part:36L ³ two Drive axle wheel reduction part: 6.5 L ³ four Engine lubricating oil: 38L |
Capacity & Drive
Rated performance is given as fuel tank capacity of Hydraulic oil tank: 540 L Fuel tank: 450 L Transmission:32 L Drive axle main transmission part:36L ³ two Drive axle wheel reduction part: 6.5 L ³ four Engine lubricating oil: 38L and electrical system rated at System voltage: 24V DC Starting motor voltage/power:24V/6kW Lighting: 2 front headlights, 2 ³ 75W, 24V, 2 rear headlights, 2 ³ 75W, 24V 2 cab ceiling lights, 24 V. Throughput is normally quoted for a reference feed gradation. Hardness, moisture and the target product size all move the real figure, which is why the duty cycle is worth stating up front.
Customisation & OEM Service
OEM production covers the nameplate, the paint scheme and the electrical configuration, plus frame modifications within the limits of the existing pattern. A drawing review normally comes back with the quotation. For this item, minimum order quantity is 1 unit and the reference price starts at US$380,000.00 per set.
Ordering & Samples
For equipment of this size the usual path is a drawing review, then a factory acceptance check before shipment. Lead time and freight are quoted against the confirmed configuration and the destination port.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
