Produced in China for mining contractors, beneficiation plants and equipment distributors, this machine is summarised below by construction, capacity and drive, followed by the commercial terms a buyer normally asks about first.

Specifications

Dimension (tramming)	10093m m×3500mm×2000m m
Bucket Capacity(SAE)	15m³
Operating Weight	30440 kg
Rated Loading Capacity	30000 kg
Front Axle	20270kg
Rear Axle	10170kg
First Gear	0~5.1km/h
Second Gear	0~9.2km/h
Third Gear	0~15.2km/h
Forth Gear	0~27.2km/h
Outer / Inner	8914 mm/4743mm
Raising Time	14s
Lowering Time	10s
Max. Lifting Height	4809mm
Discharging Angle	60°
Wheel base	5205mm
Approaching Angle	15°
Center Oscillation Angle	±8°
Min. Off-ground Clearance	357mm
Max. gradeability	25%
Max. Steering Angle	± 42 °
Model	OM460 LA
Rated Power	315KW@1800 rpm
Features	Water Cooled, Turbo Charged
Manufacture	DANA
Components	Servicing system, steering system, braking system, fill oil system
Alternator	28V 80A
Batteries	12VX2 165Ah
Lights	Front: 2 pcs Rear: 2 pcs
Sensors	Fuel/Oil level sensors, Sensors of service, steering, brake system
Alarm	Red/green indicators Rotation Warning Lamp Low oil level warning/Oil pressure warning
Monitor Screen	IFM CR1083 7"LCD
Controller	IFM CR2532

Material & Construction

The max. gradeability is stated as 25%. The grade matters more than the headline tonnage on abrasive feed: it decides relining intervals and therefore the real cost per tonne over the life of the machine.

Capacity & Drive

Rated performance is given as bucket capacity(sae) of 15m³ and rated power rated at 315KW@1800 rpm. Nameplate capacity assumes a defined feed size and bulk density. Ask for the curve rather than the single number if the plant has to hold a product-size specification.

Dimensions & Packing

Dimensions and shipping data are stated as dimension (tramming) of 10093m m×3500mm×2000m m. For heavy units the packing format is part of the quote: skid, crate or container loading changes both the freight cost and the unloading equipment required on site.

Customisation & OEM Service

OEM production covers the nameplate, the paint scheme and the electrical configuration, plus frame modifications within the limits of the existing pattern. A drawing review normally comes back with the quotation. For this item, minimum order quantity is 1 Piece and the reference price starts at US$300,000.00-500,000.00 per set.

Ordering & Samples

Ordering starts with the duty specification and a layout drawing, followed by a proforma against the confirmed configuration. Delivery schedules are quoted per order rather than published on the page.