Produced in China for mining contractors, beneficiation plants and equipment distributors, this drilling rig is summarised below by construction, capacity and drive, followed by the commercial terms a buyer normally asks about first.
Specifications
| Impact performance | Rotation performance |
| Applicable section | 3000x3000-5050x6500 mm |
| Dimensions L*W*H | 11000x1760x2525(3375)mm |
| Ground clearance | 330 mm |
| Minimum turning radius | Inside:3450/Outside: 5510mm |
| Climbing ability | 15° |
| Running speed | ≤7.2 kM/h |
| Cable length | 90 m |
| Weight | 12000 KGS |
| Rock drill | DZ622 |
| Impact power | 22 kw |
| Impact frequency | 62 Hz |
| Impact pressure | 130-200 bar |
| Rotary system | Independent rotation |
| Rotation speed | 0-275 r/min |
| Rotation torque (max) | 980 Nm |
| Total length | 5800 mm |
| Drill rod length | 4300/3700 mm |
| Depth of hole | 4000/3400 mm |
| Propulsion force | 15 KN |
| Compensation itinerary | 1400 mm |
| Horizontal hole | Complete coverage |
| Sliding frame rotation | ±180° |
| Pitch angle | +60°/-30° |
| Swing angle | ±35° |
| Drilling arm weight | 2000 kg |
| Air flow | 0.55 m³/min |
| Total installed power | 65 kW |
| Main motor power | 55 kW |
| Voltage | 380V(Customizable) |
| Diesel engine | Cummins |
| Rated output power (2200r/min) | 66 kW |
Capacity & Drive
Rated performance is given as rated output power (2200r/min) of 66 kW and running speed rated at ≤7.2 kM/h. Throughput is normally quoted for a reference feed gradation. Hardness, moisture and the target product size all move the real figure, which is why the duty cycle is worth stating up front.
Dimensions & Packing
Dimensions and shipping data are stated as dimensions l*w*h of 11000x1760x2525(3375)mm. Shipping weight and footprint drive container or flat-rack loading and the crane capacity needed at the destination, so both are normally confirmed together with the packing list.
Customisation & OEM Service
The unit can be built to your duty: alternative wear material, a different motor voltage or drive arrangement, and a modified discharge setting can all be quoted against your specification. Send the feed material, target output and site power supply and the factory will confirm what is feasible on this frame size. For this item, minimum order quantity is 1 Piece and the reference price starts at US$100,000.00-250,000.00 per set.
Ordering & Samples
For equipment of this size the usual path is a drawing review, then a factory acceptance check before shipment. Lead time and freight are quoted against the confirmed configuration and the destination port.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
