Produced in China for mining contractors, beneficiation plants and equipment distributors, this drilling rig is summarised below by construction, capacity and drive, followed by the commercial terms a buyer normally asks about first.
Specifications
| Main parameter | Parameter values |
| Size | 11000*2050*2800/3650mm |
| Maximum excavation height | 7200mm |
| Drilling diameter | φ43mm-φ102mm |
| Drill pipe length | 4305mm |
| Drilling depth | 3900mm |
| Drilling speed | 0.8-2m/min |
| Motor power | 55KW |
| Fuel tank capacity | 250L |
| Overall weight | 12000kg |
| Rock drilling power head model | DZ600 |
| Rotation | Positive 135 ° Reverse 225 ° |
| Swing arm | 45 ° left and right |
| Travel compensation | 1600mm |
| Main arm stroke | 1300mm |
| Sliding rail swing angle | 2 ° elevation and 90 ° elevation |
| Diesel engine power | 60kw |
| Turn | ±40 |
| Tires | 9.00-20 |
| Climbing ability | ≤15° |
| Rear axle swing angle | ±10° |
| Approach angle/departure angle | 17°/14° |
| Inside turning radius | Inner side 3.3m/outer side 6.95m |
| Walking speed | 12km/h |
| Ground clearance | 350mm |
| Air compressor flow rate | 0.55m³/min |
| Pressure | 0.3-0.6MPa |
| Air compressor motor power | 4KW |
| Water pump flow rate | 5m³/h |
| Pump motor power | 3kw |
| Battery rate | 2x12v |
| Driving lighting | 24v |
| Work lighting | 220v |
Capacity & Drive
Rated performance is given as fuel tank capacity of 250L and drilling speed rated at 0.8-2m/min. Nameplate capacity assumes a defined feed size and bulk density. Ask for the curve rather than the single number if the plant has to hold a product-size specification.
Dimensions & Packing
Dimensions and shipping data are stated as size of 11000*2050*2800/3650mm. For heavy units the packing format is part of the quote: skid, crate or container loading changes both the freight cost and the unloading equipment required on site.
Customisation & OEM Service
OEM production covers the nameplate, the paint scheme and the electrical configuration, plus frame modifications within the limits of the existing pattern. A drawing review normally comes back with the quotation. For this item, minimum order quantity is 1 Piece and the reference price starts at US$100,000.00-175,000.00 per set.
Ordering & Samples
A pre-shipment inspection is normally arranged so the build, the wear parts and the drive can be checked before the unit is crated. Quotation follows the final specification and shipping terms.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
