MOQ:1set
This drilling rig is offered for bulk supply and OEM production. Working principle, rated capacity and configuration are set out in the table below, with the ordering details further down the page.
Specifications
| Main parameter | Parameter values |
| Size | 17000*2800*2900/3750mm |
| Maximum excavation height | 9700mm |
| Drilling diameter | φ43mm-φ102mm |
| Drill pipe length | 5525mm |
| Drilling depth | 5300mm |
| Drilling speed | 0.8-2m/min |
| Motor power | 55*2KW |
| Fuel tank capacity | 600L |
| Overall weight | 33000kg |
| Rock drilling power head model | 1838ME |
| Rotation | Positive 135 ° Reverse 225 ° |
| Swing arm | 45 ° left and right |
| Travel compensation | 1800mm |
| Main arm stroke | 1600mm |
| Sliding rail swing angle | 2 ° elevation and 90 ° elevation |
| Diesel engine power | 129kw |
| Turn | ±40 |
| Tires | 14.00-24.00 |
| Climbing ability | ≤17° |
| Rear axle swing angle | ±10° |
| Approach angle/departure angle | 20°/17° |
| Inside turning radius | Inner side 3.3m/outer side 6.95m |
| Walking speed | 15km/h |
| Ground clearance | 350mm |
| Air compressor flow rate | 1m³/min |
| Pressure | 0.3-0.6MPa |
| Air compressor motor power | 4.5KW |
| Water pump flow rate | 10m³/h |
| Pump motor power | 7.5kw |
| Battery rate | 2x12v |
| Driving lighting | 24v |
| Work lighting | 220v |
| Impact frequency | 60Hz |
| Impact power | 18kW |
| Impact pressure | Max 230bar |
| Rotary motor model | OMS 160 |
| Impact flow rate | 71-92L/min |
| Empty buffer pressure | 3-3.5Mpa |
| Buffered traffic | 8-10L/min |
| Adapt to drill pipes | R38 , T38 |
| Rotary pressure | 210bar |
| Maximum torque | 1000Nm |
| Rotating speed | 0-215rpm |
| Lubricating oil and gas pressure | 2-3bar |
| Flushing water pressure | Max 2.5Mpa |
| Rock drilling buffer pressure | 5-12Mpa |
Capacity & Drive
Rated performance is given as fuel tank capacity of 600L and drilling speed rated at 0.8-2m/min. Nameplate capacity assumes a defined feed size and bulk density. Ask for the curve rather than the single number if the plant has to hold a product-size specification.
Dimensions & Packing
Dimensions and shipping data are stated as size of 17000*2800*2900/3750mm. For heavy units the packing format is part of the quote: skid, crate or container loading changes both the freight cost and the unloading equipment required on site.
Customisation & OEM Service
Options include wear-liner grade, drive type and the guards and chute work around the discharge. Share the installation conditions and a feasibility answer is returned with the price. For this item, minimum order quantity is 1 Piece and the reference price starts at US$280,000.00-430,000.00 per set.
Ordering & Samples
For equipment of this size the usual path is a drawing review, then a factory acceptance check before shipment. Lead time and freight are quoted against the confirmed configuration and the destination port.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
