This machine is built in China for quarries, mineral processing plants and aggregate producers, and is supplied for wholesale and OEM orders. The table below lists the build, the working parameters and the packing published for the unit.
Specifications
| Engine | Engine: VOLVO TAD1352 water-cooled low pollution engine Rated power/rated speed: 315 kW/1900 r/min Maximum output torque: 2175 N · m @ 1200 r/min Starting method:Electric starting Exhaust gas purification method:Catalytic purification method Throttle control:Williams electronic throttle controller |
| Steering system | Type: Central hinge, hydraulic steering Steering working pump:P2075/2025 Displacement: 75ml/r Maximum pressure of steering system:22 MPa Steering gear: BZZ-1000 Steering cylinder diameter/rod diameter × Number of cylinders: φ 150/ φ 90 mm × two |
| Working System | Working directional valve:M200LS Lift cylinder diameter/rod diameter × Number of cylinders: φ 180/ φ 125 mm × two Maximum pressure of working system:22MPa |
| Electrical System | System voltage:24V DC Starting motor voltage/power:24V/6kW Lighting: 2 front headlights, 2 × 65W, 24V, 2 rear headlights, 2 × 65W, 24V mining signal light 1, 24V 1 cab ceiling light, 24 V |
| Tank volume | Hydraulic oil tank:380 L Fuel tank:380 L Transmission:72L Drive axle main transmission part: 36L × two Drive axle wheel reduction part: 6.5 L × four Engine lubricating oil:40L |
Capacity & Drive
Rated performance is given as electrical system rated at System voltage:24V DC Starting motor voltage/power:24V/6kW Lighting: 2 front headlights, 2 × 65W, 24V, 2 rear headlights, 2 × 65W, 24V mining signal light 1, 24V 1 cab ceiling light, 24 V. Throughput is normally quoted for a reference feed gradation. Hardness, moisture and the target product size all move the real figure, which is why the duty cycle is worth stating up front.
Dimensions & Packing
Dimensions and shipping data are stated as tank volume of Hydraulic oil tank:380 L Fuel tank:380 L Transmission:72L Drive axle main transmission part: 36L × two Drive axle wheel reduction part: 6.5 L × four Engine lubricating oil:40L. Shipping weight and footprint drive container or flat-rack loading and the crane capacity needed at the destination, so both are normally confirmed together with the packing list.
Customisation & OEM Service
OEM production covers the nameplate, the paint scheme and the electrical configuration, plus frame modifications within the limits of the existing pattern. A drawing review normally comes back with the quotation. For this item, minimum order quantity is 1 unit and the reference price starts at US$400,000.00-480,000.00 per set.
Ordering & Samples
Ordering starts with the duty specification and a layout drawing, followed by a proforma against the confirmed configuration. Delivery schedules are quoted per order rather than published on the page.
Product Images
Specifications on this page are those published for the item. Final parameters, configuration and lead time are confirmed on quotation.
